- New
COND LAQUAtwin EC-33, pocket EC meter with 3 calibration points. HORIBA-3999960127
- Conductivity Meter LAQUAtwin EC-33
- 3 calibration points
- Replaceable sensor
Ref:3999960127
The only pocket-sized meter that directly measures conductivity in samples as small as 0.12 ml. No beaker is required to calibrate the meter or measure a sample. Simply place a few drops of the standard or sample on the sensor. This procedure saves time and prevents wasting your valuable sample.
Features:
Model |
LAQUAtwin EC-33 Ref: 3999960127 |
---|---|
Measurement Principle |
Bipolar AC with 2 electrodes |
Minimum Sample Volume |
0,12 ml |
Conductivity Range and Resolution |
0 to 199 µS/cm: 1 µS/cm 200 to 1999 µS/cm: 1 µS/cm 2,00 to 19,99 mS/cm: 0,01 mS/cm 20,00 to 199,9 mS/cm: 0,1 mS/cm |
TDS Range and Resolution: |
0,0 to 99,9 ppm: 0,1 ppm 100 to 999 ppm: 1 ppm 1000 to 9990 ppm: 10 ppm |
TDS curves |
Factor TDS (0,4 - 1,0), EN 27888, 442, NaCl |
Calibration Points |
Up to 3 |
Accuracy |
±2% full scale (for each range) ±5% full scale (20.0 to 199.9 mS/cm) |
Temperature Display |
0 to 50.0 °C |
Temperature Calibration |
5 to 40.0 °C |
Display |
Customizable digital LCD (monochrome) with backlight |
Operating Temperature |
5 to 40.0 ºC |
Operating Humidity |
85% or less relative humidity (non-condensing) |
Power Supply |
Pilas CR2032 (x 2) |
Battery Life |
Aprox. 400 horas en uso continuado |
Material |
Epoxy ABS |
Dimensions |
164 mm × 29 mm × 20 mm |
Weight |
Approx. 50 g (meter only, without batteries) |
Functions:
- Automatic range
- Automatic calibration
- Automatic standard recognition
- Automatic temperature compensation (2%/°C fixed)
- Stable measurement/auto-hold
- Waterproof (IP67)
- Auto-off (30 minutes)
- Low battery indicator
- Replaceable sensor
Included Accessories:
- 2 CR2032 batteries
- 1 syringe
- Instruction manual and quick guide
- Storage case
- 1413 µS/cm conductivity solution (14 ml)
- 12.88 mS/cm conductivity solution (14 ml)
- Conditioning solution (4 ml)
You might also like